Why Saab 9-3 Key Replacement Is Your Next Big Obsession?
How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of steps that are unique to add an additional ignition key. It requires dealer service using the handheld computer known as Tech-2. Then a new car key and transponder are required to be purchased and then programmed to the car.
Make sure to rotate your keys in order to prevent one from deteriorating faster than another. This will keep your keys in good condition.
Replacement Case
The new key fobs do not look like the older Saab keys. They are equipped with electronics that make it difficult to copy. This has made car theft considerably more difficult than it was just a few years ago. It has also made it more costly to replace keys that were lost.
Every owner of a Saab 9-3 must have at a minimum two functioning keys. If one gets lost, it is expensive to purchase a new one for the car, as it requires replacing the CIM module and programming the locking cylinders. Dealers will typically charge $100-$200 to do this.
There are ways to cut down on the high cost. Some parts retailers will find the code from an extra key (usually the same one that opens the doors and turns the ignition) and cut a new key blade out of metal for less than the dealer's cost. The key must be exactly the same as the original to allow it to function in your vehicle.
You can also replace the case yourself by following these steps. You'll need a flathead and patience. With the screwdriver you can pull apart the plastic, and then take off the emergency key. Once the case is open, remove the electronics and place them into the new case. Insert the correct key and badge inside the case.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive part that can be replaced quickly and easily. This YouTube DIY video Cyclone Cyd shows how to replace the battery of the remote key fob in just four steps. This tutorial should work with any modern Saab key fob. However, the procedure might differ slightly.
The button is normally located next to the Saab logo on the back of the fob. This is usually located near the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This should be enough to open the case so that you can replace the battery.
After the new battery CR1632 is installed You can then reassemble the remote key fob. You can then program it to your car. saab key code should take no more than an hour at most. This is a straightforward process that doesn't require any special tools.
The process is a bit more complex if you lose your key, but still possible. The dealer needs to first determine the VIN of the vehicle and order an alternative TWICE module, as well as a key blade that is matched to the unique code. After that, they'll need to cut the replacement key and then program it using the latest software tool known as MDI.
Replacement Key Fob
The key fob is equipped with a battery that is used to lock and unlock your car. Batteries are able to last for a short time and will eventually die. This is a common problem that occurs with all vehicles, and the good news is that you can change the batteries in a majority of key fobs without having to replace the whole case. You can purchase replacement fobs from Amazon that include all the electronics already installed, so you'll be able to simply open the case and replace the batteries in the original case. It is important to remember that you'll have to take out the emergency key first. you can do this by putting an incredibly small screwdriver with a flat head into the slot found in the middle of the case. The case should split when you turn the screwdriver around it.
If you're ready to replace your keys, be sure to have a spare available. This can save you a lot of money. If you have an additional key, ask the dealer to cut it and program it for your car. This is less expensive than purchasing a new fob.
If you don't have a spare, it is possible to add an additional key to your car, but it requires a lot of research and effort. Adding a second key costs about a few hundred dollars and it requires programming of the car's computer. This can be accomplished by a professional, but it is an expensive option for the majority of owners.
Replacement Ignition
Contrary to earlier Saab vehicles, the latest SAAB 9-3 models feature a much more sophisticated alarm system that is built on a key code. This means that if you lose your only functioning key, getting an additional one could be extremely expensive as the car has to have a computer module added and it must also be designed to accept a different key. The majority of locksmiths aren't able to do this or even dealers can charge several hundred dollars to program the new key!
If you've lost your only working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) to make the replacement, and will charge top dollar for it. We can reprogram the existing EEPROM inside your car's computer so that it's ready to accept an additional key. This will save you more than 50% of the price you'd have to pay the dealer.
If you've been a long-time owner of a 03-11 SAAB 9-3, you likely know that the ignition key isn't all that robust. They can become extremely sticky, and the buttons are known to be ripped off every now and then, so you should consider getting a replacement if yours isn't working properly. Fortunately, replacing the ignition key isn't as complicated as it sounds, and it can be done quickly with the right tools.